Other listings by this author |
|
 LEDataStream 1.8 (Downloads: 252)
Little-endian replacements for DataInputStream, DataOutputStream and RandomAcces Little-endian replacements for DataInputStream, DataOutputStream and RandomAccessFile. They work just like DataInputStream, DataOutputStream and RandomAccessFile except they work with little-endian binary data. Normally Java binary I/O is done with big-endian data, with the most significant byte of an integer or float first. Intel and Windows 95 tend to work with little endian data in native files. LEDataInputStream, LEDataOutputstream and LERandomAccessFile will le...
|
|
 Pentium 1.5 (Downloads: 279)
Java code to tell you facts about the Pentium and AMD CPU. Pentium works on Windows and Intel Pentium class and AMD
CPUs to determine the CPUID information such as the vendor,
brand/model, step, model, instruction set family, cpu serial
number, and the RDTSC Time stamp register for high
resolution timing measured in CPU cycles since the last
boot. It is designed to be incorporated in your own Java
progams.
You can also use it as a standalone utility with:
java.ex...
|
|
 File Splitter 1.3 (Downloads: 330)
Split large text/html files into smaller files using embedded split commands. Split large text/html files into smaller files. I find it
much faster and more accurate than cut and paste.
You embed commands in the big file telling it which pieces
of it are to go where, then let Splitter do the work. It is
much faster and more accurate than trying to select huge
blocks of text in an editor. You don't accidentally lose or
duplicate text. Keeping files small makes the site more
responsive.
|
|
 Splice 1.5 (Downloads: 455)
SPLICE splices bits of files together SPLICE splices bits of files together e.g.
SPLICE Cut MyFile.Txt Start 99 Length 99 Insert MyFile2.txt At 99
SPLICE Copy MyFile.Txt Start 99 Length 99 Overlay MyFile2.txt At 99
Uses for SPLICE:
1. excising a section of a file.
2. replacing a section of a file.
3. inserting a section into a file.
4. extracting a section of a file.
5. appending a section onto a file.
This program may be freel...
|
|
 BOOTSave 2.8 (Downloads: 288)
BootSave saves/restores the master boot sector BootSave saves/restores the master boot sector on the
hard disk. Suite of three utilities BootSave, BootRest and
BootChk. Protects against damage to the partition table or
boot sector done by rogue programs, viruses or accidents
with tools like Norton NU.
The BootSave suite will work under DOS, Windows 3.x, Windows
95/98/ME, OS/2, but not NT, Windows 2000, XP, Vista or Windows 7.
These OSes block low level disk I/O as...
|
|
 Untouch 2.4 (Downloads: 446)
Reverts files dates back if the files have not really changed. Documentation on the original student project outline
mindprod.com/projects/untouchproj.html
This explains how it works and some of its uses.
Untouch supports the following command line switches which appear
before the directories.
-c or -clear = clear history first and take current file times as the new revert-to point.
-f or -force = revert files back to previous dates whether they have changed or not.
-h or -help =...
|
|
 FontShowerAWT 2.9 (Downloads: 335)
Displays all the fonts available to AWT in Java. Displays all the fonts available to AWT in Java on your
machine. Displays the fonts in a variety of styles, sizes
and colours, rendered either with a Canvas or with a TextArea.
FontShowerAwt displays the fonts available on *your* machine
to *Java*. Other people will have different fonts installed
and will see different selections available to Java on
their machines. Your browser will see a slightly different
set of fo...
|
|
 Http 2.9 (Downloads: 784)
HTTP GET/POST/HEAD/PROBE/CHASE java class library for http: or https: http is a small library of Java classes to let you do GET/POST/HEAD/PROBE/CHASE to a server r with http: or https. It will also encode parameter pairs for you.
It does nothing on its own. It is intended to be incorporated into your own programs.
To see a sample use have a look at the com.mindprod.submitter package, downloadable...
|
|
 JarLook 1.2 (Downloads: 315)
Check that class target versions are as expected in a Java jar. Check a Java jar to make sure all the javac -target versions of
the class files are what you expect.
Java application.
Requires Java version 1.5 or later.
All Java source code is included.
to use:
java -jar jarlook.jar jartotocheck.jar 1.1 1.4
where jartocheck.jar is the name of jar to check.
It will check all the class files in it.
In this example:
1.1 is the low...
|
|
 SetClock 8.5 (Downloads: 911)
Set your PC Clock from an accurate atomic clock on the web. Set PC Clock from an accurate atomic clock on the web. You
can put in on your website so that others can use it to
correct their clocks without having to install software or
without you having to install software on your server.
Java Web Start signed.
Requires Java version 1.5 or later. Native code for Windows only.
Full Java source code included, and native C JNI code....
|
|
 Amper 1.9 (Downloads: 446)
Safely converts ampersands to !amp; entities In the following, pretend ! is an ampersand. PAD files don't let me give literal examples. Amper converts ! to !amp; in HTML files and back, but does not convert it when the ! is already in an entity e.g. !lt; !thetasym; !eacute;
The main use for this is to pass HTMLValidator verification of your HTML, which is very picky about !, especially inside URLs.
As a side effect, it also ensures all your comment delimiters balance.
It ...
|
|
 Accumulate 1.3 (Downloads: 197)
Used to accumulate values by category. Used to accumulate values by category. It might be useful
for example in a billing program to accumulate hours by
various categories.
It could be used to count how many times various words
occurred in a document.
All you need is:
buckets.accumulate( "somecategory", someamount );
And Accumulate looks after creating the buckets to
accumulate new categories for you.
e....
|
|
 JDisplay 4.5 (Downloads: 425)
JDisplay displays colorised program listings in web pages. JDisplay displays Java, HTML, bat, SQL, ini, csv, xml, mft
properties... files a variety of colours, fonts, sizes
and weights to help make them more presentable and readable.
Why would you use it? For the same sorts of reasons you use
colours and fonts in an IDE like IntelliJ or Eclipse. They
make the code much easier to understand.
There is no server-side code used. Java utilities parse the
code snippets i...
|
|
 Pws 2.0 (Downloads: 236)
PWS (the pathway amanuensis) helps you with personal problems. PWS (the pathway amanuensis) helps you with personal
problems. You describe your problem and it prescribes some
sage advise based on Ken Keyes' twelve pathways from the
book Handbook To Higher Consciousness.
To install, Extract the zip download with WinZip, available from
winzip.com (or similar unzip utility) into any
directory you please, often C:\ -- ticking off the (user
folder names) option. To run as an applicat...
|
|
 Pluck 1.0 (Downloads: 210)
Scans multiple files looking for a REGEX pattern, and summarised what it finds. Scans multiple files looking for a REGEX pattern, and
summarised what it finds as a CSV file.
java -jar C:\com\mindprod\pluck\pluck.jar "\.[a-z]+\." E:\temp\temp.csv E:\somedir
adjusting as necessary to account for where the jar file is.
The first parameter is the regex pattern. See regex in the java glossary
for how to compose them.
The next parameter is where the output in to go. use the
wo...
|
|
 LinkedList 1.6 (Downloads: 198)
LinkedList is replacement for Java Vector class. Classical doubly linked list. LinkedList is replacement for Java Vector class. Classical
doubly linked list. Faster that Vector for insert/delete, but slower
for indexed access. The interface is modeled on java.util.Vector, so
you can try it both ways and pick which is faster for your needs.
Heavily commented Java source included. copyright (c) 1997-2008 Canadian Mind
Products. May be freely distributed and and used for any purpose
except military.
...
|
|
 Encoding Recogniser 1.2 (Downloads: 213)
Help determine a file's encoding by displaying it wth all supported encodings. Encoding Recogniser will help you determine what encoding was
used to write a file by displaying the file in hex or and
decoded characters in any of the encodings supported by
Java.
This program runs under any OS,
(e.g. Win2K/XP/Vista/OSX/Linux/Solaris/Vista64/AIX...) so long as you have
Java version 1.5 or later installed.
To install, Extract the zip download with WinZip (or similar unzip utility) into
...
|
JaSFtp 11.10: JaSFtp - Automated SFTP client (secure FTP), Run 1000+ tasks on a schedule.
Domain Quester 6.02: Search for domains by unlimited number of keywords